WELCOME to the PRODUCT COMPLIANCE TRAINING FOUNDATION
Product Compliance refers to the process of ensuring that a product meets all relevant regulatory, safety, and quality standards set forth by governing bodies in the region where the product is being sold or distributed. These standards may include environmental regulations, health and safety requirements, labeling laws, industry-specific standards, and more. Therefore Product Compliance is a complex topic, and thus what better way to learn about it than to attend a relevant training course.
We have selected a diverse range of Product Compliance Training Courses below for you to browse through. However for those looking for a specific type of course the catalogue is sub-divided into the following topics:
If you have a Product Compliance Training Course that you would like us to add to this page, please go to our Request to Publish page
General Product Compliance Training Courses
Introduction to CE and UKCA Marking – Practical Guide
Course Reference STU 106
Our CE & UKCA Marking training course provides a practical approach to what you need to know to place your products on the market and into service. The course covers the principles of CE & UKCA Marking for all fields, drawing on examples from our knowledge and experience with consumer products, children’s products, electrical goods, and electronics.
Duration: 1 Day, Venue: Virtual Classroom – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
Introduction to CE and UKCA Marking your products.
Ref:- CON 101
Duration: 1 Day, Venue: On-line or Nr. Buxton Derbyshire, UK – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
CE and UKCA Marking Electrical Equipment
Course Reference CON 102
There are a variety of directives and regulations relating to electrical and electronic equipment, which you should be familiar with if you are involved in the manufacture or importation of such products.
This course will explain who is responsible for CE marking, and what should be done to carry out the process correctly, as well as looking into the directives and standards involved.
Duration: 1 Day, Venue: On-line or Nr. Buxton Derbyshire, UK – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
Introduction to UKCA Marking E-learning Course
Course Reference STU 107
As a result of the UK leaving the EU, a new product mark has been established for the Great Britain (England, Scotland and Wales) market which has replaced the EU requirements for CE Marking. The requirement for UKCA marking (UK Conformity Assessed marking) came into effect on 1st January 2021 and will be required for products being placed on the market in Great Britain (GB), consequently both UK and global businesses need to be aware of the new requirements.
Duration: 90 Minutes, Venue: On-line
LINK for FULL DETAILS and REGISTRATION
Certified Reliability Professional Training
Course Reference STU 108
In today’s competitive world, it is essential to design and manufacture products that are highly reliable. A Reliability Professional evaluates the product’s ability to perform at an expected probability of success for a specified period without compromising various stresses acting on the product in certain environmental conditions. This Engineering field is of utmost importance in the entire life cycle of the products. By applying proper techniques, products can be designed, manufactured, and tested for the stated reliability targets.
Duration: 5 Days, Venue: Virtual Classroom – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
More courses coming soon.
Medical Devices Training Courses
We have many more Medical Devices Training Courses in our NEW Medical Devices Training Foundation page.
Requirements of the Medical Device Regulation for CE Marking
Duration: 1 Day, Venue: Live On-line & Live On-Site – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
Introduction to Medical Device Software
Gain an understanding of the medical device software lifecycle processes, classification rules and development activities to meet regulatory requirements…..
Duration: 1 Day, Venue: Live On-line – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
Technical Documentation for the Medical Device Regulation
This one-day intensive course enables greater understanding of the key requirements for technical documentation for medical devices, in line with the European Medical Device Regulation (MDR) requirements in Europe. The aim of the course is to enable manufacturers to:
- Create robust technical documentation to demonstrate compliance to the MDR
- Better understand regulatory requirements and Notified Body expectation, to prevent unnecessary delays to the certification process…..
Duration: 1 Day, Venue: Live On-line – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
Implementation of Medical Device Regulation for CE Marking
This three-day course is especially useful for regulatory affairs, quality management and quality assurance professionals who need to implement the medical device regulation (MDR).
You will learn all the requirements needed for conformity assessment, how to fulfil technical documents and how to plan post-market activities required by the MDR.
Duration: 3 Days, Venue: Live On-Line & Live On-Site – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
We have many more Medical Devices Training Courses in our NEW Medical Devices Training Foundation page.
Machinery Safety Training Courses
CE and UKCA Marking Machinery and Industrial Equipment
Ref:- CON 103
Duration: 1 Day, Venue: On-line and Derbyshire UK. – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
Introduction to Machinery Safety
Course Reference STU 120
This course introduces the regulatory requirements and the supporting standards associated with the safety-related design of machinery.
‘This was a very informative training session that covered all bases with the right amount of detail and supporting info. The training experience was direct and interesting, the trainer was easy to speak to and could be asked questions at any time. All-in a good experience and would recommend.’
Duration: 1 Day, Venue: Manchester or Virtual Classroom
LINK for FULL DETAILS and REGISTRATION
Hazardous Area Awareness Competency – Machinery Safety
Course Reference STU 119
Understanding the risks, hazards, implementations and requirements of Hazardous Areas and Potentially explosive atmospheres. The course covers subjects like ATEX, DSEAR and general hazardous locations theory, and also adds information on international standards and schemes such as IECEx and UKEX. Our course also covers all of the latest updates and new Standards
Duration: 1 Day, Venue: IN-HOUSE COURSE only
LINK for FULL DETAILS and REGISTRATION
Assessing Safety Related Design of Machinery
Course Reference STU 123
This course discusses the assessment of safety of machinery, against legislative and normative requirements. It requires attendees to have a good understanding of CE/UKCA marking machinery and safety of machinery design.
Duration: 1 Day, Venue: Virtual Classroom – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
Introduction to Electrical Machinery Safety
Course Reference STU 121
This course introduces the design requirements associated with the safety-related design of electrical equipment of machinery, covering several standards.
‘The course was very well presented and the trainer was very good at gauging the level of skill the trainees had and he adjusted the speed of training to suit.’
Duration: 2 Days, Venue: Virtual Classroom – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
Machinery Risk Assessment
Course Reference CON 104
Risk assessments need to be carried out when machines are designed, manufactured, put into service and modified.
This course explains the role of standards in the risk assessment process, to enable designers and project managers to carry out the risk assessment in the most efficient way.
Duration: 2 Days, Venue: On-line only. – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
Introduction to CE/UKCA Marking & PUWER for Safety of Machinery
Course Reference STU 122
Discover the essential legislative and safety requirements for machinery design, marking, and instructions in our comprehensive training course. The agenda covers key topics such as legislation for machinery safety and enforcement, CE-marking principles and requirements, the differences between UKCA and CE Marking, and PUWER requirements for equipment design.
Duration: 2 Days, Venue: Birmingham or Virtual Classroom – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
More courses coming very soon
If you have a Product Compliance Training Course that you would like us to add to this page, please go to our
Request to Publish page
Functional Safety Training Courses
ISO 26262 Automotive Functional Safety Training and Certification for Engineers (Level 1)
Course Reference STU 109
The ISO 26262 Functional Safety Training and Certification Program (FSCP) is a personal certification program. The program trains professionals to have complete understanding and updated technical knowledge of the safety related systems that the standard accounts for. It aims at building a basic understanding about safety-related functions with respect to electrical and electronic systems to minimise risks and failure in the automotive sector. It applies from the concept phase, design phase, product development, commissioning to decommissioning phase.
Duration: 4 Days, Venue: Virtual Classroom – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
Functional Safety Engineer for ISO 13849 & IEC 62061 Training
Course Reference STU 110
Advance Your Career: Master Functional Safety Principles
Improve your knowledge of functional safety with our three-day online instructor-led course, accredited by TÜV SÜD and focusing on the ISO 13849 & IEC 62061 standards. This course is ideal for UK professionals involved in managing or designing safety-related control systems in machinery.
Duration: 3 Days, Venue: Virtual Classroom – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
Functional Safety Professional Training Course – ISO 13849 & IEC 62061
Course Reference STU 111
This course focuses on manufacturing systems and devices for functional safety in the machinery sector.
“The Tutor has a wealth of knowledge in Functional Safety. He allowed for open discussions about real-life scenarios from attendees without cutting short the discussions. The course was well paced and ensured that all the content was sufficiently covered.”
Duration: 4 Days, Venue: Manchester or Virtual Classroom – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
Safety Plan ISO 26262 E-Learning Course
Course Reference STU 112
Safety is one of the key issues in the development and validity for all road vehicles like trucks, buses, motorcycles, and automobiles. The Safety Plan defines all necessary activities to be compliant with the standard.
In this self-paced e-Learning training, students will learn how to use the Safety Plan in different roles as a part of Functional Safety Management and how to meet avoidance systematic faults as required by ISO 26262. You will also learn how to tailor the Safety plan and how to derive safety activities in scheduled steps.
Duration: 77 Minutes, Venue: On-line only
LINK for FULL DETAILS and REGISTRATION
Functional Safety ISO 26262 ASIL Risk Classification E-Learning
Course Reference STU 113
This course on functional safety comprises of two modules., Here, you will learn about the concept of functional safety and its importance with examples/scenarios. The course covers the definition of functional safety and explains how the Functional Safety standard helps in getting the product rolled out in the market with adequate safety. It also provides more insight into the concept of risk, risk assessment and risk measurements and also differentiates between reasonable and unreasonable risks.
Duration: 120 Minutes, Venue: On-line only
LINK for FULL DETAILS and REGISTRATION
IEC 61508 Industrial Automation Functional Safety Training and Certification for Engineers (Level 1)
Course Reference STU 114
Our IEC 61508: Basic Functional Safety training includes course modules 1-3 and is designed to train participants in the basic principles of IEC 61508 Functional Safety, the processes necessary for your role in the safety life cycle (highly recommended for beginners) and also at the same time improve their expertise in safety related functions for Electrical, Electronic and Programming systems.
Duration: 3 Days, Venue: Manchester or Virtual Classroom – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
IEC 61511 Process Functional Safety Training and Certification for Engineers (Level 1)
Course Reference STU 115
This training course is designed as a combined capsule of different modules based on years of practical experience in the field of Functional Safety and participation in relevant standardisation committees. The course imparts the required knowledge relating to the existing IEC 61511 international standards for safety-relevant electrical / electronic systems, it covers the design and management requirements for Safety Instrumented Systems throughout the entire safety life cycle.
Duration: 3 Days, Venue: Manchester or Virtual Classroom – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
ISO/PAS 21448 Basic Training Course, Essentials to achieve the safety of the intended functionality (SOTIF)
Course Reference STU 116
Based on our long-standing practical experience in the field of Functional Safety we supply you with the necessary expertise for the new ISO/PAS 21448 dealing with “Safety of the Intended Functionality” (SOTIF). For driver assistant systems and automated driving, the safety of the intended functionality (SOTIF) is a very important complement to functional safety.
Duration: 1 Day, Venue: (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
ISO/PAS 21448 Advanced Training Course – Technical aspects to achieve the safety of the intended functionality (SOTIF)
Course Reference STU 117
While functional safety addresses the integrity of electrical and/or electronic (E/E) systems within road vehicles, SOTIF deals with the minimization of risk from insufficiencies of functional performance and robustness. The various aspects of safety are key issues in the development.Our training is based on the latest concepts developed in industry, used to implement the public available specification ISO/PAS 21448.
Duration: 1 Day, Venue: (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
EN 5012X Rail Functional Safety Training and Certification for Engineers (Level 1)
Course Reference STU 118
Functional safety ensures that safety risks due to hazards caused by the malfunctional behavior of systems are reduced to an acceptable level. This 3 day course includes the following standards:
- EN 50126 (IEC 62278): Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS)
- EN 50129 (IEC 62425): Safety related electronic systems for signaling
- EN 50128 (IEC 62279): Software for railway control and protection systems
- EN 50159: Safety-related communication in transmission systems
Duration: 3 Days, Venue: Virtual Classroom (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
More courses coming very soon
Miscellaneous Training Courses
Electrical Safety for Products
Ref:- ROY 101
Duration: 1 Day, Venue: Castleford, West Yorkshire or IN-HOUSE
LINK for FULL DETAILS and REGISTRATION
The Pressure Equipment Directive
Course Reference CON 105
The Pressure Equipment Directive covers all pressure vessels, piping safety accessories and pressure accessories; and it is vital that these products are correctly CE marked.
You will learn who should take responsibility, how to find and apply standards, what documentation you need to produce, and the role of Notified Bodies.
Duration: 1 Day, Venue: On-line only. – (Also available as an IN-HOUSE COURSE)
LINK for FULL DETAILS and REGISTRATION
ATEX Compliance and Risk Assessment
Ref:- CON 106
Duration: 1 Day, Venue: Derbyshire UK. or IN-HOUSE COURSE
LINK for FULL DETAILS and REGISTRATION
Hazardous Area Awareness Competency
Course Reference STU 119
Understanding the risks, hazards, implementations and requirements of Hazardous Areas and Potentially explosive atmospheres. The course covers subjects like ATEX, DSEAR and general hazardous locations theory, and also adds information on international standards and schemes such as IECEx and UKEX. Our course also covers all of the latest updates and new Standards
Duration: 1 Day, Venue: IN-HOUSE COURSE only
LINK for FULL DETAILS and REGISTRATION
More courses coming very soon
If you have a Product Compliance Training Course that you would like us to add to this page, please go to our
Request to Publish page
People who browsed the Product Compliance Training Courses above also viewed the three books below from the Product Compliance Library.
